How To Fold Bestway Air Mattress?

December 7, 2023

17 Views 0

SaveSavedRemoved 0

Folding a Bestway air mattress properly can help maintain its longevity and make storage much easier. To fold a Bestway air mattress, first, ensure the mattress is fully deflated by opening the valve and pressing down on the surface to expel all the air. Once deflated, fold the mattress in thirds lengthwise, and then carefully roll it up from one end to push any remaining air out through the valve. When it’s tightly rolled, close the valve, and secure the mattress with straps or place it in its storage bag.

Deflating the Bestway Air Mattress

Step 1: Locate the Valve

Start by finding the air valve on your Bestway air mattress. This is usually located on one of the sides or at the foot of the mattress. Most modern air mattresses come with a built-in pump, and the valve can be used for both inflation and deflation.

Step 2: Open the Valve and Deflate

Open the valve by removing the cap or twisting it open, depending on your model. If your mattress has a quick-release valve, simply pull it open and the air should start rushing out.

Step 3: Expedite the Deflation Process

To speed up deflation, you can gently press down on the mattress. Starting from the opposite end of the valve, apply even pressure across the mattress to push the air out. Folding or gentle rolling the mattress towards the valve can also help.

Folding the Mattress

Once your mattress is fully deflated, you can begin folding.

Step 1: Create Initial Folds

Lay the mattress flat on the ground and smooth out any wrinkles. Begin folding by bringing one side of the mattress in towards the center, then fold the other side over the first fold. You want to end up with a narrow strip that is roughly one-third of the mattress’s original width.

Step 2: Rolling the Mattress

Starting from the end opposite the air valve, tightly roll the mattress towards the valve. This will help push out any leftover air. If you notice resistance or air bulging elsewhere in the mattress, unroll it slightly and adjust the folds, then continue rolling.

Securing and Storing the Mattress

Step 1: Close the Valve

Once you’ve rolled the mattress completely, quickly close the valve to prevent air from getting back in. If the valve is left open, the mattress can start to unroll and draw air back in, undoing your hard work.

Step 2: Use Straps or the Storage Bag

If your mattress came with straps, use them to secure the tight roll. If not, consider using strong tape or purchase aftermarket straps. Slide the mattress back into its storage bag, if provided, or store it in a clean, dry place where it won’t be punctured or damaged.

Maintenance Tips for Your Folding Air Mattress

To keep your air mattress in top condition, here are some extra tips:

Deflation Do’s and Don’ts

Never use sharp objects to press out air, and avoid kneeling or walking on it with shoes on. This can cause damage to the mattress surface.

Proper Folding Technique

Be consistent with your folding pattern. Repeatedly folding the mattress in the same way can help prevent stress and wear on specific areas.

Storage Considerations

Store the mattress in a cool, dry place to avoid mold and mildew growth. Avoid places with extreme temperatures or direct sunlight, which can degrade the material over time.

Finishing Thoughts

With these steps and tips, folding your Bestway air mattress should be a breeze. Proper deflation, folding, and storing techniques will not only make your mattress easier to handle but also extend its lifespan. Remember to treat your mattress gently during the deflation and folding process to ensure it remains in good working condition for as long as possible. As with any product, regular maintenance and careful storage will go a long way in preserving its quality and comfort.